Kenwood TH-22A Instruction Manual

Also see for TH-22A: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

MEMORY CHANNELSA total of 40 memory channels (0 to 39) are available forstoring frequencies and related data. Each memorychannel can be used either as a simplex channel or splitchannel. Alternatively, a standard or non-standardfrequency offset and offset direction required for usingrepeaters can be stored. Refer to "OPERATINGTHROUGH REPEATERS" {page 27}.The data listed below can be stored in each memorychannel:SplitPp Simplexatameler Channel ChannelYESShift status, REV statusDTSS code, DTS statusYES: Can be stored in memoryN/A : Not applicableSTORING DATA IN MEMORYThere are 2 methads of storing transmit/receivefrequencies and associated data in memory channelsdepending on the relationship of the transmit and receivefrequencies:« Simplex memory channels:RX frequency = TX frequency® Split memory channels:RX frequency * TX frequencym Simplex Memory Channels1 Select the desired frequency and associated data(Tone, CTCSS, DTSS, etc.) using the VFO,Memory Recall or the Call channel.2 Press [F] (1 s) to select Memory Storage.3 Select the desired memory channel using theENC/SQL control.21