Kenwood TH-22A Instruction Manual

Also see for TH-22A: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

m Canceling Automatic OffsetAutomatic Offset can be canceled as described below:1 Press [CALL] + POWER ON to enter MenuSet-up.2 Turn the ENC/SQL control to select Menu No. 07.e The current Automatic Offset status appears.e The default is "ON" for TH-22 versions sold inthe U.S.A., Canada and Europe.3 Press [CALL] to select "OFF" or "ON".e OFF: Cancels Automatic Offset.e ON: Restores Automatic Offset.4 Press any key ether than [CALL], [LAMP], or[MONI] to exit Menu Set-up.Note: After turning ON Automatic Offset again, or aftertransferring memory channel contents to the VFO, thefeature resumes functioning when a new frequency isselected.SELECTING OFFSET VALUES MANUALLYTo change the amount of offset, use the followingprocedure:1 Press [F] (1s), [REV].2 Turn the ENC/SQL control to select the desired value.« The values range from 0.00 MHz to 99.95 MHz in50 kHz steps.3 Press any key other than [MONI] or [LAMP] to storethe selected value.e The previous mode is restored.Remember the following points before altering the offset:eTheTH-42Eoffsetcan bechangedfromthe default1.6MHzvalue;however,the7.6MHzvalueisnotconfigurable.e lItis not possible to set different offset values for theVFO and memory channels.eThe new manuallyselected valuewillbe used evenifAutomaticOffsetisswitched ON.29