Kenwood TS-950S Service Manual

Also see for TS-950S Digital: Instruction manual Instruction manual Instruction manual Instruction manual Service manual

ADJUSTMENTTS-9905/5DMeasurement AdjustmentKem vendition equimtent |Unit |Terminal; Unit |Parts Method Specifications/Remarks23-1. ALC 1) MAIN DISP : 14.200MHz ! DC V.M CONT | VR3 CONT |vR2 0.01V +0.001Vmeter MODE : USB j (A¥3) {A/3} i :ZERO Control unit (A/3) VR3 i; Centered| _STBY ; SEND { :23-2. ALC | 1) MIC terminal : AG (1kH2/Sm¥) |Power ‘Rear ANT Front |MIC «Set the MIC GAINmeter METER ALC : Push meter panel panel |GAIN |VR to 1 dot of ALCFULL STBY : SEND ‘ : meter {just beforej AG Front |MIC i | 1 dot lights).2) MIC terminal : AG {1kHz/10mV) |AF V.M {panel |ALC CONT |VR3_ |Adjust for MAXSTBY : SEND meter (A/3) LALC zone reading.24. PROC 1) MODE : USB Power Rear |ANT {Front |PROC | Set the PROC IN VR:meter METER COMP : Push meter panel jpanel |INVR |to1dotof COMP |}PROC SW: ON : ! meter (just before| MIC terminal : AG (1kHz/ImV¥) |AG Front |MIC i | 4 dot lights).STBY : SEND AFV.M — ; panel ! £2) MIC terminal : AG (1kH2/10m¥) COMP | CONT |VA9 Adjust for 20dBSTBY : SEND | meter | (A/3) | COMP meter. iAfter adjusted | j :PROC SW: OFF {| | i25-1. FM MIC | 1) MAIN DISP : 29.050MHz Power Rear | ANT ; AF | VAS | DEV +4.6kHz !DEV i MODE: FM meter panel ? I :| FILTER 455 : 12kHz DirectionalMIC terminal : AG (1kHz/30mV) |coupier |STBY : SEND Linear | i25-2. MIC 1) MIC terminal detector { VRE DEV +3.0kHz £0.1kHzGAIN AG (1kH2/3mV) W,W2,X | Oscilloscope ! H: AG (1kHz/5mV) K,M,P !STBY : SEND AG Front |MIC I25-3. MIC 1) FILTER 455 : 6kHz AF V.M panel VR4 DEV +2.3kHz £0.1kHzGAIN MIC terminal : AG {1kHz/30mV)(FM narrow) STBY : SEND2) MIC terminal Check DEV +1.4~1.6kHz: AG (1kH2z/3mV) W,W2,X ;> AG (1kHz/5mV) K,.M.P |STBY : SEND !26. SUB TONE | 1) MAIN DISP : 29.700MHz Power Rear |ANT Check that SUB Please press the TONE keyMODE : FM meter panel TONE indication will |it disappeared.FUNCTION TX VFO: B Directional appeare to 88.5c.A=B key : 1 push couplerTONE : ON Linear AF VR3 DEV +600Hz +50HzMIC terminal : Open detector iSTBY : SEND Oscilloscope!After adjusted AF V.MTONE : OFFTXVFO:A27, FM carrier |1) MAIN DISP ; 29.700MHz Power Rear |ANT SIG VR6 Adjust for MAXMODE : FM meter panel ALC zone reading.METER ALC : ON DirectionalMIC terminal : Open couplerSTBY : SEND28-1. DSP 1) DSP unit Power Rear |ANT IF VR5 Set to mechanicalTS-950SD Si:1 meter panel centered point.$2:1$3-1 : OFF$3-2 : OFF |$3-3 : OFF$3-4 : ONTPS : Short (ON)169