Keysight Technologies E4360 Series User Manual

Also see for E4360 Series: Service guide Service guide

Contents

General Information 1Series E4360 User’s Guide 17Menu Command Control DescriptionSystem IO DigPort Pin3 FunctionPolarityTrig OutSpecifies pin function: DigIn, DigIO, TrigIn, TrigOut, InhibitIn.Specifies pin polarity: Positive, NegativeSpecifies the output trigger source. Acq, Tran, Dwel, DlogPin4 FunctionPolarityTrig OutSpecifies pin function: DigIn, DigIO, TrigIn, TrigOut, OnC, OffC.Specifies pin polarity: Positive, NegativeSpecifies the output trigger source. Acq, Tran, Dwel, DlogPin5 FunctionPolarityTrig OutSpecifies pin function: DigIn, DigIO, TrigIn, TrigOut, OnC, OffC.Specifies pin polarity: Positive, NegativeSpecifies the output trigger source. Acq, Tran, Dwel, DlogPin6 FunctionPolarityTrig OutSpecifies pin function: DigIn, DigIO, TrigIn, TrigOut, OnC, OffC.Specifies pin polarity: Positive, NegativeSpecifies the output trigger source. Acq, Tran, Dwel, DlogPin7 FunctionPolarityTrig OutSpecifies pin function: DigIn, DigIO, TrigIn, TrigOut, OnC, OffC.Specifies pin polarity: Positive, NegativeSpecifies the output trigger source. Acq, Tran, Dwel, DlogData Sends/reads data from the digital I/O portStates Reset Resets the instrument to its reset (*RST) state.SaveRecall Saves or recalls an instrument state.PowerOn Selects the power-on state: *RST, RCL0.Groups Groups Defines groups of output channels that are paralleled.Parallel Defines the parallel connections: Direct or Auto-parallel.Programming Defines the parallel control: Internal or External via analog port.Preferences Display Contrast Configures the display contrast.Saver Configures the screen saver and wake-on I/O timer.View Selects 1-channel or 4-channel view at turn-onKeys Enables/disables key clicks and configures the On/Off key.Lock Locks front panel keys. Enter a password to unlock the keys.Admin Login/Logout Enter a password to access the admin functions.Cal Function Voltage P1 Enters measured data for the first calibration point.P2 Enters measured data for the second calibration point.Current P1 Enters measured data for the first calibration point.P2 Enters measured data for the second calibration point.OVP Calibrates the over-voltage protection.OCP Calibrates the over-current protection.Date Saves the calibration date for each channel.Save Saves the calibration data.LAN Enables/disables the LAN interface and the built-in Web server.USB Enables/disables the USB interface.Nvram Resets all non-volatile RAM settings to their factory defaults.Password Changes the password for the admin functions.Memory Initialize Initializes the table memory to the factory defaults.Erase Erases and sanitizes the instrument’s table memoryAbout Frame Displays model, serial number, and firmware revisions.Module Displays model, serial number, options, voltage, current, power.