Keysight Technologies E4360 Series User Manual

Also see for E4360 Series: Service guide Service guide

Contents

3 Getting Started42 Series E4360 User’s GuideUsing the Front Panel MenuThe front panel command menu lets you access most of the SASfunctions. The actual function controls are located at the lowest menulevel. Briefly: Press the Me nu key to access the command menu. Press the navigation keys to move across the menu commands. Press the center (Se l) key to select a command and move down tothe next level in the menu. Press the He lp key at the lowest menu level to display helpinformation about the function controls.A map of the front panel command structure is found in chapter 1. Thefollowing example shows you how to navigate the front panel commandmenu to program the over-voltage protection function.Set the Over-Voltage ProtectionThe over-voltage protection function turns off the affected output if theoutput voltage reaches the programmed over-voltage limit.Menu Press the Menu key to access the front panel command menu.The first line identifies the output channel that is being controlled followedby the menu path. Since the top level is displayed, the path is empty.The second line indicates the commands that are available at the presentmenu level. In this case, the top-level menu commands are shown, with theOutput command highlighted.The third line indicates which commands are available under the Outputcommand. Selecting the highlighted command accesses this lower level.SelPress the right arrow  navigation key to traverse the menu until the Protectcommand is highlighted. Press the Sel key to select the Protect command.SelThe menu path now shows that the commands shown on the second line arelocated under the Protect command. The OVP command is highlighted. Thethird line indicates which functions are located under the OVP command.Press the Sel key to select the OVP command.