Keysight Technologies E4360 Series User Manual

Also see for E4360 Series: Service guide Service guide

Contents

Specifications and Application Information Appendix ASeries E4360 User’s Guide 89Supplemental Characteristics (continued)Parameter E4360ARegulatory ComplianceEMC:Safety:Complies with European EMC Directive for test and measurementproducts.● IEC/EN 61326-1● CISPR 11, Group 1, class A● AS/NZS CISPR 11● ICES/NMB-001Complies with Australian standard and carries C-Tick mark.This ISM device complies with Canadian ICES-001.Cet appareil ISM est conforme à la norme NMB-001 du Canada.Complies with European Low Voltage Directive and carries the CE-marking.Conforms to UL 61010-1 and CSA C22.2 61010-1.Declarations of Conformity for this product and for other Keysightproducts may be downloaded from the Web. Go tohttp://www.keysight.com/go/conformity and click on “Declarations ofConformity.” You can then search by product number to find the latestDeclaration of ConformityAC MainsInput ratings:Power consumption:Power factor: NOTE 1AC line spike rating:Fuse:~ 100 VAC – 240 VAC; 50/60/400Hz1440 VA (@ <, 180 VAC input for E4360A)2200 VA (@ >, 180 VAC input for E4360A)1440 VA (@100 VAC – 240 VAC input for E4360J01)0.99 @ nominal input and rated power1 kV typical15A / 250 VAC non-time delay (Keysight p/n 2110-0054)100-180 VAC Note: AC mains circuits rated at nominal 100-180 VAC cannot supply enough current to power theE4360A mainframe when two output modules are installed. In this case, internal circuits will limit the output current ofthe modules to one half of their rating. For a single installed module, full output current will be available at nominal100-180 VAC. This restriction does not apply to mainframe Model E4360J01.DimensionsHeight:Width:Depth including handles:88.1 mm / 3.5 in. for E4360A44.75 mm / 1.75 in for E4360J01432.5 mm / 17.03 in.633.9 mm / 24.96 in.Net WeightE4360A with 2 output modules:E4360J01 with 2 output modules:Single output module:17.6 kg / 38.4 lbs.11.82 kg / 26 lbs3.3 kg / 7.2 lbs.1 Under full load at 400 Hz, power factor drops from 0.99 @ 120 VAC to as low as0.76 @ 265 VAC. Power factor degrades further under no load conditions.