4-6 Configuring Your ServerPrimary IDE Master/Primary IDE Slave/Secondary IDE Master/Secondary IDESlave/Serial ATA Channel 0 Master/ Serial ATA Channel 1 MasterCorrespondence between the menu items and devices: Primary IDE Master: ATA hard disk drive 1 (option) Primary IDE Slave: ATA hard disk drive 2 (option) Secondary IDE Master: CD-ROM drive (standard) Secondary IDE Slave: None Serial ATA Channel 0 Master: Serial ATA hard disk drive 1 (option) Serial ATA Channel 1 Master: Serial ATA hard disk drive 2 (option)Option Parameter Description Your SettingType NoneUser[Auto]CD-ROMSelects the type of device attached tothe IDE or serial ATA channel. It isstrongly recommended to keep thefactory setting [Auto].The following options do not appear when None or Auto are selected for Type.Multi-SectorTransfersDisabled2 Sectors4 Sectors8 Sectors16 SectorsSpecifies the number of sectors thatare transferred per block duringmultiple sector transfers.LBA Mode Control EnabledDisabledEnable/disable LBA instead ofcylinder, head, sector, addressing.Transfer Mode StandardFast PIO 1Fast PIO 2Fast PIO 3Fast PIO 4FPIO 3/DMA1FPIO 4/DMA2Select the method for moving datato/from the drive.Ultra DMA DisabledMode 0Mode 1Mode 2Mode 3Mode 4Mode 5Select the Ultra DMA mode used formoving data to/from the drive.[ ]: Factory-set
