3-18 Setting Up Your ServerCONNECTING POWER CORDConnect the provided power cord to the server.WARNINGObserve the following instructions to use the server safely. Failure to followthese instructions may result in death or serious personal injury. See pages 1-3to 1-8 for details. Do not hold the power plug with a wet hand. Do not connect the ground wire to a gas pipe.CAUTIONObserve the following instructions to use the server safely. Failure to followthese instructions may cause a fire, personal injury, or property damage. Seepages 1-3 to 1-8 for details. Do not plug the power cord in to an improper power source. Do not connect the power cord to an outlet that has an illegal number ofconnections. Insert the power plug into the outlet as far as it goes. Use the authorized power cord only.1. Plug the provided power cord into the power receptacle on the rear of the server.2. Plug the other end of the power cord into the wall outlet.IMPORTANT: Connect the power cord to a circuit breaker of 15A or less. Secure the power cord with a tie wrap.
