9-36 Upgrading Your Server6. Install the PCI board on the riser card.Align the PCI board terminal section with the riser card slot, and firmly push the PCIboard until it is fully seated.IMPORTANT: Do not touch the terminals of the riser cards and PCI boards withyour bare hand. Fingerprints and dust left on them cause the serverto malfunction. If you are unable to install a PCI board correctly, remove it, andthen install it again. Be careful not to apply excess force to a PCIboard or riser card. Doing so may damage the card.NOTE: Confirm that the end of the PCI board bracket is inserted in theframe slot of the riser card.7. Secure the PCI board with the screw you removed in step 5.IMPORTANT: This step is to protect the terminals of the riser cardfrom dust or fingerprints. Dust and fingerprints left on them cause theserver to malfunction.Insert the end of the PCI board bracketin the frame slot of the riser card.Low-Profile side Full-height sideLow-Profile side Full-height side
