Troubleshooting 8-23The following error log is included in the event log while operating the system:Event ID: 16Source: iANSMiniportType: ErrorCategory: NoneDescription: Team #0:The last adapter has lost link.Network connection has been lost.→ Though the above error is included in the event log when specifying the teaming, theLAN driver can work properly.[Complete] does not appear on [Role of Computer] screen.→ The [Complete] does not appear if the Setup File that has already been created isloaded.→ [Complete] appears only when you first entered the [Role of Computer] screen.Once you go to the next screen from [Role of Computer], the [Complete] will notappear even if you enter [Back] to go back to the [Role of Computer] screen.Select [Use Existing Array] at [New/Existing RAID Configuration], but the OS is installed in thewhole area of the disk.→ Is there any other partition than the partition to re-use (excluding maintenance area)?If the partition other than the one to re-use does not exist, the setup will reserve thewhole area of the disk to install Windows 2000.Specified to join the Domain, but the system is installed as Workgroup.→ When the setup fails to join the Domain during the installation, it will install thesystem as Workgroup. Open [System] in Control Panel to specify joining theDomain.Specified large value as partition size, but when Windows 2000 is actually started, the systempartition is created by 4095MB.→ Is the [Partition Size] specified by the value larger than the real area? If you want tocreate one partition in all area of the hard disk drive (excluding the maintenance area)to install the OS, specify [All Area].→ Are you specifying over 200GB for the partition size?Be sure to specify less than 200GB for the partition size.Windows 2000 started with different display resolution from the specified value.→ If the specified display resolution can not be used, the system will use the nearestvalue or the default value of the driver.
