Setting Up Your Server 3-19To connect the power cord from the server to an uninterruptive power supply (UPS), use serviceoutlets on the rear of the UPS.The UPS service outlets are categorized into two groups: SWITCH OUT and UN-SWITCH OUT.(They may be called "OUTPUT1" and "OUTPUT2".)To control power supply with an application (NEC ESMPRO/UPSController) that controls the UPS,connect the power cord to an SWITCH OUT outlet.For constant power supply, connect the power cord to a UN-SWITCH OUT outlet. (Connect themodem that is in service for 24 hours to this outlet.)2OUTPUT(UNSWITCHOUT) OUTPUT(SWITCH OUT)AC100V 50/50HZWhen the power cord from the server to a UPS, change the BIOS setup of the server to link withpower supply from the UPS.To power on the server from the UPS (Uninterruptible Power Supply), select [Server] - [AC-LINK]- [Power On].Change a parameter for "AC-LINK" under the Server menu of the BIOS SETUP utility. SeeChapter 4 for details.
