General Description 2-31POWER SwitchUse the POWER switch to turn on/off the server.Power OnPress the POWER switch on the front of the computer chassis.The POWER LED lights in green.IMPORTANT: If the power cord is connected to a power control device such as aUPS (Uninterruptive Power Supply), make sure that the powercontrol device is powered. If the power cord is connected to the server, an initial diagnosis ofthe hardware starts. The POWER switch does not work while indiagnosis. Wait for about 10 seconds, then press the POWERswitch. Always allow POST to complete before powering down yoursystem.POWER LEDPOWER switch
