Upgrading Your Server 9-76. Firmly hold the additional hard disk drive (with the tray provided) and handle, and insertit into the slot.IMPORTANT: Push the hard disk drive until it docks with the SCSI backplaneconnector. Carefully hold the hard disk drive with both hands. Do not press the POWER switch during the installation or removalof the hard disk drive if your server is running.7. Slowly close the handle.The handle is locked when a "click" is heard.IMPORTANT: Be careful not to get your finger caught between the handle and tray. Push the drive further to check if it is firmly secured.NOTE: Confirm that the handle is hooked to the frame when havinginserted the hard disk drive.8. Install the front bezel you removed in step 2.There are tabs on the left side of the front bezel. Engage the tabs with the server frame,install the front bezel, and lock it with the security key.
