Configuring Your Server 4-33When you select the array on Main Menu, the detailed information of the hard disk drives in array isdisplayed.Detailed indications■ ID - Indicates SCSI ID of hard disk drive that configures the array■ Type - Indicates RAID level for the array. Striped (R0) - Array configured in RAID0 Mirrored (R1) - Array configured in RAID1 Stripe/Mirror (R10) - Array configured in RAID10 (spanning of RAID1)■ Vendor - Indicates the manufacturer of hard disk drive.■ Product - Indicates the model name of hard disk drive.■ Size - Indicates the capacity of hard disk drive.■ Status - Indicates the status of hard disk drive. Optimal - Hard disk drive is normally operating. Degraded - Hard disk drive is being degraded. Failed - Hard disk drive is being failed. Building - Hard disk drive is being built. Verify - Hard disk drive is being verified. Replaced - Hard disk drive is being rebuilt. Missing - Hard disk drive is being hidden from controller.Exiting the UtilityTo exit the utility, press Esc until the following message prompts you to exit. Select [Yes] to exitand press any key to restart the computer. The change you have made becomes valid after thesystem restarts.
