4-36 Configuring Your ServerUsing WebBIOSStarting WebBIOS1. Press Esc when the screen as shown below appears after powered on the server.2. Press Ctrl + H on POST screen to start WebBIOS.POST screen image (with no virtual disk assigned)LSI MegaRAID SAS-MFI BIOS Version XXXX (Build MMM DD, YYYY)Copyright (c) xxxx LSI CorporationHA -X (Bus X Dev X) MegaRAID SAS PCI 8708EM2FW package: X.X.X-XXXXX Logical Drive(s) found on the host adapter.X Logical Drive(s) handled by BIOSPress for WebBIOSIMPORTANT: Do not press unnecessary key such as Pause during POST. If you fail to press Ctrl + H and the system proceeds withoutdisplaying the WebBIOS main menu (shown on the next page),reboot the system, and press Ctrl + H on POST screen.
