Configuring Your Server 4-21ExitThe options on the menu are described below.Exit Saving ChangesSelect this item to terminate SETUP after saving the newly selected information in CMOS(nonvolatile memory). Selecting "Exit Saving Changes" causes the confirmation screen to appear. Ifyou select "Yes," SETUP is terminated with the newly selected information saved in CMOS(nonvolatile memory). Then the server automatically reboots the system.Exit Discarding ChangesSelect this item to terminate SETUP without saving the newly selected information in CMOS(nonvolatile memory). When the confirmation message "Save before exiting?" appears, select "No"to terminate SETUP without storage of the modified information. Then the server proceeds to Bootmenu. Selecting "Yes" allows SETUP to be terminated with storage of the modified information.Then the server automatically reboots the system.Load Setup DefaultsSelect this item to return all the values of SETUP to the default values. Selecting "Load SetupDefaults" causes the confirmation screen to appear. Select "Yes" to return the values to the defaultvalues. Select "No" to return to the Exit menu screen.Load Custom DefaultsSelect this item and press Enter to load the custom defaults stored. This menu does not appear ifthe Custom Defaults are not saved.Save Custom DefaultsSelect this item and press Enter to save the parameters currently being edited as custom defaults.When the parameters are saved, the Load Custom Defaults menu appears.Discard ChangesSelect this item to return the values modified currently to the previous values before saving thevalues to CMOS.Save ChangesSelect this item to save the newly selected information to CMOS (non-volatile memory) without thetermination of SETUP.
