Troubleshooting 8-13Errorcode Error message Recommended Action0BB0 SMBIOS – SROM data read error.0BB1 SMBIOS – SROM data checksum bad.Contact your service representative.8010 The error occurred during water cooling unitsensor reading.8012 Water pump #n out of the range.8068 Unsupported Processor Speed detected onCPU Slot 1.8069 Unsupported Processor Speed detected onCPU Slot 2.8150 NVRAM Cleared by Jumper Start SETUP and provide setting again.8151 Password Cleared by Jumper Start SETUP and set password again.8160 Mismatched Processor Type/Speed detectedon Processor 1.8161 Mismatched Processor Type/Speed detectedon Processor 2.Contact your service representative.None Expansion ROM not initialized – PCI MassStorage Controller in slot xx (xx: slot number)Disable initialization of the optional deviceexpansion ROM by using the BIOS SETUPutility (see Chapter 4).
