4-76 Configuring Your Server4. On the right of the screen, items required for reconstruction are displayed.5. Select "Migration with addition".6. Specify the RAID level used after reconstruction.7. Select a HDD to be added.8. When you finished steps 5 to 7, click [Go] at the lower right of the screen.9. The progress of reconstruction is displayed on the lower left of the screen. Click [Home]at the lower left of the screen to return to the WebBIOS Top Menu.IMPORTANT: The capacity of virtual disk may be incorrectly displayed afterreconstruction. In this case, perform Scan Devices from the TopMenu. Click [Home] while the background task such as Consistency Check,Rebuild, or Reconstruction is being executed. With the progressindication being displayed, the background task may be processed atslow rate.Information of HDDs inthe disk group in whicha VD is defined.Migration Only:Allows change of RAIDlevel.Migration with addition:Allows addition of harddisk drive and change ofRAID level.
