7-8 MaintenanceStartup and Exit of System DiagnosticsThere are two ways to diagnose the server: to use the local console (keyboard) of the server itself,and to use the management PC via serial port (remote console).IMPORTANT: Two methods of LAN and the serial port are mentionedin "MAINTENANCE TOOLS" of Chapter 8 "Troubleshooting" in theway of communicating in remote console.Use the serial port to execute System Diagnostics with remote console.The LAN connection is not for System Diagnostics.Procedures to start the diagnostics program are as follows:1. Shutdown the OS, and power off the server. Then, unplug the power cord.2. Disconnect all the LAN cables from the server.3. Plug the power cord and power on the server.4. Use the NEC EXPRESSBUILDER DVD to start the system.5. Select [Maintenance Tools (Normal mode)] when local console of the server is used for, orselect [Maintenance Tools (Redirection mode)] when remote console is used for.NOTE: If the system displays the [Language selection] menu, select[English].The following menu is displayed on the screen.Local console Remote console
