Application Gateway Administration GuideChapter 2 Basic AdministrationGenerating a Secure Certificate212 Double-click the Lock symbol in the bottom right corner of the browser.3 Switch to the Certificate Path window pane at the top of the screen.4 Double-click the first path level to bring up the Certificate information forthe first level and then go to the Details screen.5 Click the Copy to File button at the bottom.6 After the Certificate Export Wizard appears, click Next.7 Click the format Base-64 encoded and then click Next.8 Enter a filename. For example, G:\tmp\root.cer.9 Review the information and note the complete filename. Click Finish.10 Click OK to close the Certificate information window for the first level.11 Repeat Steps 5–11 for all levels except the last level.12 Insert all certificates into one file, and make sure that any intermediatecertificates are part of any certificate file you upload.The file to be uploaded should be in the following format:private keyServer CertificateIntermediate Certificate 0Intermediate Certificate 1Intermediate Certificate 2Uploading a Certificate to the Application GatewayAfter you have completed the steps to obtain and assemble a properlyformatted, signed certificate and private key, you can upload it to theApplication Gateway.Note When you save the Application Gateway configuration, the uploadedcertificates are included in the backup.To upload a certificate file:1 In the Administration Tool, go to the Administration > Maintenancepage.2 Across from Upload Certificate, click Browse.
