Chapter 5 LDAP/CSV Directory ConfigurationLooking Up Attributes in Your LDAP Directory60 Application Gateway Administration GuideFor information on the schedule settings, see “Synchronizing theApplication Gateway with Your Directories,” page 67.2 Click Submit.3 Continue as follows:• If you have completed configuring all directories, go to “AddingDialing Rules,” page 66.• To configure another LDAP directory, select the source number fromConfigure Source and specify the connection and attributeinformation for that source.• To configure a directory in CSV format, select the source number fromConfigure Source and go to “Configuring the Application Gateway toUse Directory Files in CSV Format,” page 63.Looking Up Attributes in Your LDAP DirectoryWith the exception of the LDAP Base DN syntax, which is site-specific, theattributes provided on the Operation > Voice Office > Directory page aredefaults common to more widely used LDAP directory applications. If adefault attribute does not work for your site, you can easily look up thecorrect attribute with the free LDAP Browser from Softerra.Dial Prefix You can specify a dial prefix with each LDAP directory. When a numberfrom Telephone Field 1 is dialed, Express Directory will prepend to thephone number any prefix from the dialing rules specified on the IPPhone page followed by this directory-specific dial prefix. (This prefixdoes not apply to Telephone Fields 2 or 3.)For example, suppose that you have two directories, A and B. A call todirectory A requires the prefix “5” and a call to directory B requires theprefix “6”. The dialing rule specified on the IP Phone page is “9”. Thus,the number for a call to directory A would be “95number” and thenumber for a call to directory B would be “96number”.If the same dial prefix is used for all directories, you can specify it on theIP Phone page for all directories.Field Description
