Chapter 6 Broadcast Server InstallationInstalling Broadcast Server Software76 Application Gateway Administration GuideBroadcast Server Software InstallationThe Broadcast Server installer is provided on a CD-ROM. Onscreenprompts guide you through the required steps. Note that the credentialsrequested are for Broadcast Server only.To install the software:1 On the device to be used as Broadcast Server, insert the Broadcast ServerCD-ROM in the CD drive.2 If the installer does not start automatically, run setup.exe.3 Follow the steps in the Setup Wizard.Upon completion, the Setup program will open a browser windowdisplaying the Broadcast Server Configuration Wizard.4 Follow the steps in the Configuration Wizard.Use a static IP address for Broadcast Server.Upon completion, the Configuration Wizard will open the BroadcastServer administration window.5 Log in and complete the items listed in the “Outstanding tasks” area onthe Broadcast Server home page. These steps include changing theadministrative password, defining groups and creating users.Connecting the Application Gateway and Broadcast ServerTo enable the Application Gateway to locate Broadcast Server, you needto specify the route to Broadcast Server in the Application GatewayAdministration Tool. The Application Gateway communicates withBroadcast Server server over port 9998.To specify the Application Gateway route to Broadcast Server:1 Make sure that the Application Gateway is running.2 From a web browser, connect to the Application Gateway by entering theURL:https://ipAddress:adminPortwhere:- ipAddress is the IP address of your Application Gateway
