146 Chapter 6 Networked TAPI/IVR213346.023 From another telephone set, call the DN of a monitored telephone set.On the TAPI server for M1-A perform the following tasks in the TAPI browserapplication:1 Select the offering call in the middle pane, and select lineAnswer in the lefthand pane.2 To do a blind transfer of call data select the connected line in the middle pane.Select lineSetupTransfer in the left hand pane.3 Click OK.4 Select lineSetCallData in the left hand pane. Click OK.5 Select DialtoneLine in the left hand pane and click Line Dial.6 Select IpszDestAddress. Enter a valid DN on switch B to transfer to.7 Click OK.To answer an incoming call on the TAPI server for M1-B, in the TAPI browserapplication perform the following tasks:1 Select the offering call in the middle pane and select lineAnswer in the lefthand pane.2 Select lineGetCallInfo in the left hand pane to display line call information inthe right hand pane. The dwUserUserInfo and dwCallData fields ofLINECALLINFO structure show the call data entered by the user.Troubleshooting IVR and networking featuresThis section describes some common problems encountered when configuringIVR and networking features for Symposium TAPI SP. When troubleshootingkeep the logger application running. Clear the log file before you begin atroubleshooting session. To store important log information permanently, renamethe overflow.log file, or save it to a different location.
