86 Chapter 4 Configuration guidelines213346.02Downloading information from the Succession switchBefore you download information from the Succession switch, create a switchconfiguration information text file on the TAPI server:1 In Notepad or a similar text editor application, create a text file.2 Save this text file as download.txt in the c:\m1server directory on the TAPIserver.3 Connect to the Succession switch from the TAPI server in one of thefollowing ways:— On a Windows 2000 server, select “Start -> Programs -> Accessories ->Communications -> HyperTerminal”.— On a Windows 2003 server, select “Start -> All Programs -> Accessories-> Communications -> HyperTerminal”.4 When the port settings window opens, log on to the switch.5 Select transfers.6 In the HyperTerminal application on a Windows 2000 server or Windows2003 server, select the Capture Text option.7 Select the download.txt file that you created earlier.8 To capture information about all used terminal number blocks (TNB), enterthe following commands in overlay 20:> LD 20REQ: PRTTYPE: TNBCUST 0 (or customer number)~DES Note: When you log on to the Succession switch, if text does not appear,press the Return key a number of times the login prompt is displayed.Note: To download information from the Succession overlayapplications can take a long time.
