44 Chapter 2 Installation guidelines213346.02NEW ROUT 0.0.0.0 47.1.1.250where 47.1.1.250 is the IP address of the default gatewayPrimary IP address proceduresThis section provides procedures for the activation, validation, and recovery of thePrimary IP address.Activation procedureManually initialize the system to activate the connection to the IP addressconfigured in overlay 117.Validation procedureTo verify that the primary IP address is active, compare the IP address configuredin overlay 117 with the IP address used in overlay 137. The IP addresses must beidentical in both overlays To perform the validation, use the following sample as atemplate, substituting relevant values where appropriate:> LD 117OAM000PRT ELNKACTIVE ETHERNET: PRIMARY_IP 47.48.49.50INACTIVE ETHERNET: SECONDARY_IP 47.48.49.51OK> LD 137 CIOD000STAT ELNKELNK ENABLEDEthernet (ln unit number 0):Host: PRIMARY_IP Internet address: 47.48.49.50Note: You must perform a manual initialization to establish the initialconnection to the primary IP address. After the connection is established,another manual initialization is required only if the primary IP address ischanged.
