138 Océ 9600 Copier/Printer User Manual Default.kos/Default.sasThese files contain the factory default settings for the key operator andsystem administrator, respectively, and cannot be changed. Backup.kos/Backup.sasThese files contain a previous version of the settings for the key operator andsystem administrator, respectively (before the last application of settings). Current.kos/Current.sasThese files contain the version of the settings for the key operator and systemadministrator after the last application of settings.When an new settings are applied, the contents of the current settings arecopied to the backup file. There are two versions of this file, one for KOsettings and one for SA settings. These files are always stored on the system. Load a settings file1 Open the ‘File’ menu and select ‘Open’.A dialog box is displayed from where you can choose the correct file.2 Click on the ‘Apply’ button.The loaded settings are transferred to the system.Note: This is only possible if the user is logged in as a key operator or systemadministrator. Specify the custom cardThe custom card on the scanner panel contains high priority settings. Becausethere is only room for five default settings on the basic card and there are morefunctions that might qualify, the custom card is programmable.This option allows you to add or delete current settings on the custom card. Inthe left window, all available setting groups are displayed. In the right window,all the current settings are displayed. You can use the two arrow buttonsbetween the two windows to add settings to or remove settings from the customcard.1 Click on the ‘Scanner’ button.2 Select the ‘Custom card’ tab.3 Press the upper arrow button to add settings to the custom card. The maximumnumber of settings that can be added to the custom card is five.4 To change the order of the settings on the card, click on one of the buttons onthe right of the ‘Custom card’ window.5 Click on the ‘Apply’ button to save any changes you have made.
