Introduction 17Océ 9600 componentsThe Océ 9600 is available as a digital network printer, copier and scan-to-filesystem. It consists of the following components: Printer (see ‘Océ 9600 printer’ on page 17) Scanner (see ‘Océ 9600 scanner’ on page 18) Controller (see ‘Océ 9600 controller’ on page 19) Optional features (see ‘Océ 9600 optional features’ on page 21)These components, in combination with your network, Plot Director and oneor more drivers (Windows driver, AutoCAD HDI or PostScript), allow you touse the Océ 9600 as your default enterprise printing and copying solution.See the Océ 9600 Connectivity Manual for more details about makingnetworking settings on the Océ 9600 printer. More information aboutinstalling, configuring and using drivers can be found in the documentationprovided with the drivers.Note: All Océ drivers and file submitters can be freely downloaded from theInternet at www.oce.com.Océ 9600 printerAs a user, you can perform a number of activities at the Océ 9600 printer. Youcan start up and shut down the printer, set the media type and size, set a specialmedia indication, stop a print job or select your preferred language from theprinter operating panel (see chapter 2, ‘Using the Océ 9600 Printer’ on page 25for more details). With the manual feeder, you can manually feed sheets ofprinting material if you want to print a job on a media type and/or size that isnot available on one of the paper rolls or in one of the cassette trays (see ‘Océ9600 manual feeder’ on page 18 for more information).
