152 Océ 9600 Copier/Printer User ManualManual feedDescription Use ‘Manual feed’, to allow manual feed only upon requestby the printer. Only portrait orientation is allowed.Min/max values N/AMenu path Jobs - Copy & File - Defaults - Copy - Sheet - Manual feed- - ApplyCut length methodDescription The Océ 9600 determines the length and width of each digi-tal image. Use ‘Print cut method’, to select one of the follow-ing default cut methods:Standard: The print length corresponds to a standard format,depending on the media width.Synchro: The print length is related to the length of the im-age. This is the default value. The minimum print length is279 mm or 11 inches.Custom: The print length is defined by the user. The mini-mum length is 279 mm or 11 inches. The default value isspecified with the Cut length option.Min/max values N/AMenu path Jobs - Copy & File - Defaults - Copy - Sheet - Cut lengthmethod - - ApplyCustom cut lengthDescription You can define a specific cut length.The specified cut length is used when the Custom cut meth-od is selected. If custom cut is enabled, the copy medialength will only depend on this setting, any other influenceis excluded.Min/max values 11 – 590.55 inchesMenu path Jobs - Copy & File - Defaults - Copy - Sheet - Custom cutlength - - Apply
