222 Océ 9600 Copier/Printer User Manual8 Use both hands to slide the material under the metal paper guide until it makescontact, as shown in figure 102.[102] Using both hands to load the materialNote: If the print material is especially curled, it may be somewhat difficult toslide the material under the paper guide. If this is the case, you can slightly foldback the top few centimeters (no more than 10) of the print material tofacilitate the load process.9 Press the appropriate green button inside the paper roll compartment (seefigure 103). The material will automatically be fed into the machine.You may also refer to the sticker inside the drawer.[103] Button for feeding and cutting the paper10 Press the green button a second time to cut off the material protruding from thepaper path.11 Remove the scrap material.12 Close the roll compartment.13 Press the on line button to put the system off line.Feed/cutbuttons
