Loading supplies 219MediaThe Océ 9600 is available in many configurations, ranging from two rolls in asingle drawer, four rolls in two drawers plus three cassette trays and amaximum of six rolls with one cassette tray.Note: Contact your Océ representative if you want to know more about theavailable configurations.Each of the rolls and cassette trays on the Océ 9600 may be loaded with printmaterial of a different size or type. The size and type of the available media areindicated on the operating panel.Note: In case you have three cassette trays, no A4 size material and no A3landscape material can be used in the bottom cassette trays. The minimum sizeof media in the third cassette tray is A2.Attention: After loading new print material, you need to inform the systemabout the size of the material and of the type of print material that wasloaded (paper, transparent, or polyester).The definition of the size and type of the new print material is required in orderto: Enable the automatic media switch function to work correctly (see‘Automatic roll switch’ on page 174) Prevent folding errors (when a folder is installed) Support autozoom and auto format functions.Caution: It is highly advisable to place heavy rolls (A0, A1, and 175 meterrolls of plain paper) in position 1 of the top drawer, position 3 of the middledrawer or position 5 of the bottom drawer, to minimize user strain. Thediameter of rolls should not exceed 185 mm (6.5 inches).
