System administrator settings 215TCP/IPSetting DescriptionDomain To specify the network domain name. The network domainname is the TCP/IP address of the domain server where theOcé 9600 controller is connected to.DNS To specify the DNS server. Use semicolons ( ; ) to separateentries.Enable To specify whether or not the TCP/IP adapter is enabled ordisabled, in order to allow TCP/IP communication.Enable DHCP To enable or disable the DHCP protocol, this allows networkadministrators to manage and automate the assignment ofInternet Protocol. In order to make DHCP recognize yoursystem, a fixed IP address has to be configured.IP address To specify the IP address for the server. A single adapter cardcan have more than one adapter on it, so it is possible tospecify several IP addresses.IP mask To specify the IP subnet mask for the server. The subnetmask is a number that, when compared by the computer witha network address number, will block out all but the neces-sary information.Default gateway To specify the default gateway IP address. A gateway con-nects networks using different protocols so that informationcan be passed from one to the other. A gateway both trans-fers information and converts it to a form compatible withthe protocols used by the receiving network.Primary WINSserverType the IP address for the primary WINS server. This usesWindows Internet Name Service (WINS) protocol in combi-nation with name query broadcasts to resolve computernames to IP addresses.Secondary WINSserverType the IP address for the secondary WINS server. Thisuses Windows Internet Name Service (WINS) protocol incombination with name query broadcasts to resolve comput-er names to IP addresses.IPX/SPXSetting DescriptionEnable To specify whether or not the SPX adapter is enabled or dis-abled.
