Windows Utilities- 116 -Register a Form on the MachineUsing the Storage Manager Plug-in1 Click icon.2 Click icon, and select the created form.The form is added to the project.3 Click on the form file.4 Enter the [ID], and click [OK].Note Do not change [Target Volume] and [Path].Memo When using the Windows PS printer driver, enter[Component].5 Select the device in the device selectionarea at the bottom of the StorageManager Plug-in window.6 Click icon.7 Click on [OK].PDF Print Direct (for MB451/MB451w/MB471/MB471w/MB491/ES4191 MFP)You can send a PDF file to the machine and printit directly. With PDF Print Direct, the procedurefor opening PDF files with applications such asAdobe Reader has been shortened.Print a PDF file.1 Check that there is the [OKI MB491(*)]icon in the [Devices and Printers]folder.2 Right-click on the PDF you would like toprint, and select [PDF Print Direct].A window is displayed.3 Select the printer driver from [SelectPrinter].When setting the user verification function on theselected printer driver, select [User Auth] fromthe [Printer Settings] menu.4 If you want to print an encrypted file, puta check in [Set Password] and enterthe password.In order to use the same password after this, clickon [Save Password].5 Change the setting as required and clickon [Print].Print Job Accounting ClientThis is client software for Print Job Accounting.You can set the user name and Job Account ID inthe print driver.Note If you carry out an update and reinstallation of the printerdriver, it will be in non-compatible mode, so please set itback to job account mode. However, if you are using afunction with all the printer drivers set to the same mode,you do not need to set the mode back.Setting the user name and jobaccount ID.Can set the user name and job account ID in theprinter driver properties.1 Click on [Start], and select [AllPrograms]>[Okidata]>[Print JobAccounting Client]>[Change JobAccounting Mode].2 Select the driver you would like to setfrom the driver list.If you would like all printer drivers to be set to thesame mode, click on [Set the same modefor All drivers.].3 Select [Tab] and click on [Change].A window is displayed.4 Click on [OK].5 Select [Close] from the [File] menu.6 Click on [Start] and then select[Devices and Printers].7 Right click on the printer icon and select[Printer Properties].8 Select the [Job Accounting] tab, enterthe user name and job account ID, andclick on [OK].
