Useful Functions- 12 -Copying ID Cards (ID CardCopy)This function allows you to copy both sidesof an ID card, such as a driver's license,onto one side of a piece of paper.Note You cannot use the ADF for this ID Card Copy function. The area of 2mm from the edge of the document glass isthe scan margin. The machine scans an area half the size of the specifiedpaper. If the document is more than half the size of thepaper size, the excess part is discarded.1 Press the <COPY> key.2 Press the to enter the [Changesettings] menu.3 Press the to select [ID Card Copy]and then press .4 Press the to select [ON] and thenpress .5 Press the until the copy start screenappears.6 Place your card with the front side facedown on the document glass.7 Enter the number of copies.8 Press .9 When the [Please set back side ofdocument.] screen is displayed, placeyour card with the back side face downon the document glass.10 Check that [Start Scan] is selected andthen press .Erasing Edge Shadows (EdgeErase)When you copy a document with the documentcover open or when you copy a book, the edgesmay be printed as black shadows.This function allows you to erase such shadows.Reference You can set [Edge Erase] as a default so that you do nothave to perform the following procedure every time youmake copies. For details, refer to "View Information" P. 80.1 Press the <COPY> key.2 Place your document with text face up inthe ADF or face down on the documentglass.3 Press the to enter the [Changesettings] menu.4 Press the to select [Edge Erase] andthen press .5 Press the to select [ON] and thenpress .6 Enter a value for width using the ten-keypad and then press .7 Press the until the copy standbyscreen appears.8 Enter the number of copies.9 Press .Setting Margins (Margin)This margin function allows you to set themargins. This is useful when you staple or punchholes in copies. You can set the top, right,bottom, or left margin by specifying the [Top]and [Left] values.Note A part of the document image may be missing on the copy. The specified margin values stay the same even when youchange the zoom ratio. Specify the appropriate orientation of the image in[Direction] to get the copy result you want.Reference You can set [Margin] as a default so that you do not haveto perform the following procedure every time you makecopies. For details, refer to "View Information" P. 80. When Making Simplex Copies1 Press the <COPY> key.2 Place your document with text face up inthe ADF or face down on the documentglass.3 Press the to enter the [Changesettings] menu.4 Press the to select [Margin] and thenpress .5 Press the to select [ON] and thenpress .OKOKMONOOKOKOKOKMONOOKOK
