Initializing- 168 -5 Press to select [Management] andthen press .6 Press to select [SD Memory CardSetup] and then press .7 Press to select [Format Partition]and then press .8 Press to select the partition you wantto initialize and then press .A message appears confirming you thatcontinuing will automatically restart the system.Select [Yes] to continue.Initializing Flash MemoryFlash memory has saved mail templates, etc.,stored on it.Use the following steps to initialize.Note When you initialize flash memory, the following data isdeleted:- Custom demo data- Font data1 Press the <SETTING> key2 Press to select [Admin Setup] andthen press .3 Enter the administrator password.4 Select [Enter], and then press .5 Press to select [Management] andthen press .6 Press to select [Flash MemorySetup] and then press .7 Check that [Initialize] is selected andthen press .8 Check that [Execute] is selected andthen press .A message appears confirming you thatcontinuing will automatically restart the system.Select [Yes] to continue.Resetting the MachineSettingsYou can return the configured settings to theirdefault.Note When you initialize the equipment settings, the followingdata is deleted:- Stored documents on the Fcode bulletin board- Fax jobs that have not been sent- Fax jobs received in the Fcode parent box.- Registered job macros- Dialing logs- E-mail logs1 Press the <SETTING> key.2 Press to select [Admin Setup] andthen press .3 Enter the administrator password.4 Select [Enter], and then press .5 Press to select [Management] andthen press .6 Press to select [Reset Settings] andthen press .7 Check that [Execute] is selected andthen press .A message appears confirming you thatcontinuing will automatically restart the system.Select [Yes]to continue.OKOKOKOKOKOKOKOKOKOKOKOKOKOKOK
