Oki MB441MFP User Manual

Also see for ES4161 MFP: Setup guide User manual User manual Basic user manual User manual

Contents

Oki MB441MFP User Manual Manual pdf 154 page image

Changing Network Settings From the Web Page- 154 -47 Click [Finish].48 On the IP security policy propertieswindow, click [OK].49 On the [Local Security Policy] window,select the new IP security policy.50 From the [Action] menu, select[Assign].51 Check that for the new IP security policy,[Policy Assigned] is displayed as[Yes].52 Click [X] on the [Local Security Policy]screen.Controlling Access Using IPAddress (IP Filtering)You can control access to the machine using theIP address. You can set whether to allowconfiguration or printing from the IP addressesspecified. By factory default, IP filtering isdisabled.Note Be sure to specify the correct IP address. If you specify awrong IP address, you cannot access the machine usingthe IP protocol. When you enable IP filtering, the access to and from a hostthat is not specified in these steps is rejected.Memo You can use only IPv4 for IP filtering.1 Access the machine's web page and login as the administrator.2 Select [Admin Setup].3 Select [Network Manager]>[Security]>[IP Filtering].4 Follow the on-screen instructions tospecify detailed settings.Note If nothing is registered in[Administrator's IPAddress to Register], you may not be able to accessthe machine depending on the specified IP addressrange. If you use a proxy server, [Your Current LocalHost/Proxy IP Address] and the IP address of yourhost may not match.5 Click [Send].The network card reboots to enable the newsettings.Control Access Using MACAddress (MAC AddressFiltering)You can control access to the machine using theMAC address. You can allow or reject the accessfrom the specified MAC addresses.Note Be sure to specify the correct MAC address. If you specifythe wrong MAC address, you cannot access the machinevia a network.Memo You cannot specify to accept or to reject for each addressindividually.1 Access the machine's web page and login as the administrator.2 Select [Admin Setup].3 Select [Network Manager]>[Security]>[MAC Address Filtering].4 Follow the on-screen instructions tospecify detailed settings.Note If nothing is registered in [Administrator's MACAddress to Register], you may not be able to accessthe machine depending on the specified MAC address. If you use a proxy server, [Your Current LocalHost/Proxy MAC Address] and the MAC address ofyour host may not match.5 Click [Send].The network card reboots to enable the newsettings.Error Notification by E-mail(E-mail Alert)You can set the machine to send an errornotification e-mail when an error occurs. You canset when to be notified: On a periodical basis Only when an error occursConfiguring Your MachineYou can configure the settings for e-mail alertusing the web page.Memo If you have configured the settings for Scan To Mail / ScanTo Internet Fax that are described in the "User's ManualBasic", the server configuration is complete. When you specify a domain name in [SMTP Server],configure the DNS server in the [TCP/IP] setting.