List of the Device Setting Menu Items- 93 -Configuring at the Operator Panel6 Network MenuMemo To enable the settings changed in the [Network Control] menu, the network card must be restarted. Follow the instructions onthe confirmation screen displayed when changing the settings, and restart the network card.EPSONFX SetupCharacter Pitch 10CPI Specifies character pitch in this emulation.Character Set SET-2 Specifies a character set.Symbol Set IBM-437 Specifies a symbol set.Letter O Style Disable Specifies the style that replaces 9BH withletter o and 9DH with a zero.Zero Character Normal Sets the zero to be slashed or unslashed.Line Pitch 6LPI Specifies the line spacing.White Page Skip OFF Selects whether blank pages are printedor not.CR Function CR Selects whether a received carriage returncharacter (0Dh) also causes a line feed.Line Length 80 Column Specifies the number of characters perline.Form Length 11 or 11.7inchSpecifies the length of paper.TOF Position 0.0 inch Specifies the distance of print from the topedge of the paper.Left Margin 0.0 inch Specifies the distance of print from the lefthand edge of the paper.Fit to Letter Disable Sets the printing mode that can fit printdata, equivalent to 11 inches (66 lines), inthe LETTER-size printable area.Text Height Same Sets the height of a character.SAME: Regardless of CPI, same heightDIFF: As CPI, character heights vary.Item FactoryDefault DescriptionNetworkSettingTCP/IP Enable Sets whether to enable TCP/IP.IP Version IPv4 Selects the IP version.IPv6 can be selected only by Telnet. WhenIPv6 is selected by Telnet, the screenbefore selecting items, [IPv6] is dis-played, and on the screen after selectingitems, nothing is selected.Display condition:TCP/IP protocol isenabled.NetBEUI Disable Sets whether to enable NetBEUI.NetBIOS over TCP Enable Sets whether to enable NetBIOS over TCP.Display condition: TCP/IP protocol isenabled and the IP version is not set toIPv6.NetWare Disable Sets whether to enable NetWare.EtherTalk (MB451/MB451w/MB471/MB471w/MB491/ES4191 MFP Only)Disable Sets whether to enable EtherTalk.Frame Type Auto Selects a frame type.Display condition:Netware is enabled.Item FactoryDefault Description
