Windows Utilities- 120 -5 Enter your password into [Password]and click on [OK].- The default password is the last 6 alphanumericaldigits of the Ethernet address.- The password is case sensitive.6 Click [OK] on the confirmation window.The machine restarts to enable the new settings.During the restart, the machine status iconchanges to red. The machine will restart, the newsettings will become active, and the status iconwill turn green.Set Web settingsYou can launch the webpage, and set the mainunit network. Enable Web Settings1 Launch Network Card Setup.2 Select the machine from the list.3 Select [Setting Printer] from the[Setting] menu.4 Select the [Printer Web Page] tab.5 Select [Printer Web Page - Enable]and click on [OK].6 Enter your password into [Password]and click on [OK].- The default password is the last 6 alphanumericaldigits of the ethernet address.- The password is case sensitive.7 Click [OK] on the confirmation window.The network card restarts to enable the newsettings. During the restart, the machine statusicon changes to red. The machine network cardwill restart, the new settings will be active, andthe status icon will turn green. Opening a Webpage1 Launch Network Card Setup.2 Select your machine from the list.3 Select [View Web Page] from the[Setting] menu.The webpage will restart, and the machine statuspage will be displayed.Changing the Password.1 Launch Network Card Setup.2 Select your machine from the list.3 Select [Change Password] from the[Setting] menu.4 Enter the current password.- The default password is the last 6 alphanumericaldigits of the ethernet address.- The password is case sensitive.5 Enter the new password, and reenter itfor confirmation.The password is case sensitive.6 Click [OK] on the confirmation window.Change the Environment.You can configure the machine search condition,time-out value for each setting, and items to bedisplayed on the list.1 Launch Network Card Setup.2 Select your machine from the list.3 Select [Environment Settings] fromthe [Option] menu.4 Set the settings as required and click [OK].
