Oki MB441MFP User Manual

Also see for ES4161 MFP: Setup guide User manual User manual Basic user manual User manual

Contents

Oki MB441MFP User Manual Manual pdf 19 page image

Various Functions for Transmission- 19 -Faxing23 Press the to select [Fax Functions]and then press .4 Press the to select [Memory Tx] andthen press .5 Press the to select [OFF] and thenpress .6 Press the until the fax standby screenappears.7 Place your document with text face up in theADF or face down on the document glass.8 Specify a destination.9 Press .Manual TransmissionManual sending (On-hook dial)Press the <FAX/HOOK> key and confirm thereceiving tone of the destination, then send.1 Press the <FAX/HOOK> key to light upin blue.2 Set the document on the auto documentfeeder or document glass.3 Press the <FAX/HOOK> key and inputthe fax number of the destination.4 Set the fax function as necessary.5 After the receiving tone (peep) of thedestination is heard, press the Monostart key to start sending.You can transmit faxes manually when therecipient uses manual reception mode or whenyou want to send a fax after talking on the phone.Note You can scan only a single page when using the documentglass for manual transmission. You need to connect an external telephone to the machineto send faxes manually. The following functions are unavailable in manualtransmission:- broadcast- transmission at the specified time- Fcode transmission- ID check transmission- check broadcast destinations- (Pressing Dial Twice confirm dial)Memo You do not have to disable memory transmission. Even if the start screen other than the fax functions isdisplayed in the machine, you can perform manualtransmission by lifting the handset.1 Pick up the handset.2 Dial a number.3 Place your document with text face up in theADF or face down on the document glass.4 Configure the fax functions if necessary.5 When you hear a Fax tone, pressto start transmission.You can put down the handset.Memo When putting down the handset, after the transmission iscomplete, the display screen of the machine returns to thescreen displayed before the manual transmission.If you keep picking the handset, you can talk to yourdestination.Transmission to MultipleDestinations (Broadcast)This function allows you to transmit faxes tomultiple destinations at the same time. You canspecify up to 100 destinations using the ten-keypad, speed dial, and group lists of destinations.1 Place your document with text face up inthe ADF or face down on the documentglass.2 Press the <FAX/HOOK> key.3 Check that [Fax] is selected and pressto open the fax start screen.4 Check that [Add Destination] isselected and then press .5 Specify a destination.6 Repeat steps 4 to 5 to enter all thedestinations.7 When you have specified all thedestinations, press .8 [Please press Start key to begintransmission. To delete, select addressand press Delete.] appears.9 If specified all the destination appears,press .Memo Press the <RESET/LOG OUT> key to cancel theoperation.OKOKOKMONOMONOOKOKMONOMONO