Windows Utilities- 124 - For Windows PS Drivers1 Launch the printer properties screen.Reference "Launch the Utility" P. 1232 Select the [Device Settings] tab.3 Click on [Get installed optionsautomatically] and then click on[Setup].4 Click [OK].Uninstall the Utility1 Click on [Start], and then select[Control Panel]>[Add or RemovePrograms].2 Select [OKI Network Extension] andclick on [Remove].3 Follow the instructions on the screen andcomplete the uninstallation.TELNETYou can configure each type of setting with aTelnet command.Note Telnet access to the machine settings is turned off in theinitial settings.In order to use Telnet commands, set [Telnet] to[Active], either on the webpage or on the machine controlpanel. For Windows 7/Windows Vista/Windows Server 2008 R2/Windows Server 2008, Telnet commands are inactive inthe initial settings.In order to use Telnet commands, select [Start] >[Control Panel] > [Programs] > [Programs andFeatures] > [Turn Windows features on or off]. Set[Telnet Client] to active in the displayed dialog box.Memo For the next procedure, the following environment will beused as an example. The details may differ depending onthe OS you are using.- OS: Windows 7- IP Address: 192.168.0.2- MAC Address: 00:80:87:84:9C:9B1 Click on [Start] and select [AllPrograms]>[Accessories]>[Command Prompt].2 Following "(Driver Password): /Users/Username>" enter "ping (Space)machine IP Address".<Press theEnter> key and check that access isenabled.E.g.: "C:/Users/WINDOWS > ping 192.168.0.2"3 Following "telnet (Space)", enter the IPaddress of the machine and press the<Enter> key, in order to access themachine through Telnet.E.g.: "C:/Users/WINDOWS>telnet 192.168.0.2"4 After "login:" enter "root" and press the<Enter>.5 If a prompt is displayed, enter yourpassword following "Password" and pressthe <Enter> key.Enter E.g: "password: 849C9B".Memo The default "root" password is the last 6alphanumerical digits of the machine's MAC address.6 If a menu command is displayed, enterthe menu number you would like tochange, and press the <Enter> key.7 Change the settings as required.8 Save settings and log out of themachine.
