Various Functions for Transmission- 22 -b) Enter a value between 0 and 31 (days),and then press .Memo When [00] (day) is set, data is retained for anindefinite period.19 Press . For Fcode Bulletin Board Commu-nication1 Press the <SETTING> key.2 Press the to select [Admin Setup]and then press .3 Enter the administrator password.4 Select [Enter] and then press .5 Press the to select [Fax Setup] andthen press .6 Press the to select [Fcode Box] andthen press .7 Press the to select a box number andthen press .8 Check that [Register] is selected andthen press .To edit the registered Fcode Confidential Box,select [Edit].9 Press the to select [Bulletin Box] andthen press .10 Check that [Box Name] is selected andthen press the .11 Enter a box name.12 Select [Enter] and then press .13 Press the to select [Sub-Address]and then press .14 Enter a sub address.15 Select [Enter] and then press .16 Press .Transmission Using a Sub Address(Fcode Transmission)By entering a sub address, Fcode confidentialtransmission and Fcode bulletin boardtransmission can be done.Memo Be sure to check a destination sub address.1 Place your document with text face up inthe ADF or face down on the documentglass.2 Press the <FAX/HOOK> key.3 Check that [Fax] is selected and pressto open the fax start screen.4 Press the to select [Fax Functions]and then press .5 Press the select [Fcode Tx] and thenpress .6 Press the to select [ON] and thenpress .7 Enter the sub address of the boxregistered in the recipient machine.8 Select [Enter] and then press .9 Press the until the start screenappears.10 Press the to select [Add Destination]and then press .11 Specify a destination.12 Press .Reception Using a Sub Address(Fcode Polling)You can perform Fcode polling by entering thesub address of a sender machine's bulletin box.This function makes a remote fax machinetransmit a fax in response to instructions fromyour machine.Note You cannot receive data if the sender has a password onthe bulletin box.1 Press the <FAX/HOOK> key.OKOKOKOKOKOKOKOKOKOKOKOKOKOKOKOKOKOKMONO
