- 71 -Configuring at the Operator Panel66. Configuring at the Operator PanelThis chapter explains how to configure the equipment settings from the <SETTING> key on theoperator panel. Changing the Equipment SettingsThis section explains the basic procedure to change the equipment settings.Reference For details on the menu structure of the equipment settings, refer to "Device Setting Menu" P. 73.Memo An item which cannot be re-set is indicated as [---].Admin Setup or Easy SetupTo enter the [Admin Setup] menu or the [EasySetup] menu, an administrator password isnecessary.Memo The default password is "aaaaaa".1 Press the <SETTING> key to open theequipment setting menu.2 Press the to select [Admin Setup] or[Easy Setup] and then press .3 Enter the administrator password.4 Select [Enter] and then press .5 Press the to select the setup menu onwhich you want to change a setting andthen press .6 Change the setting and then pressFor [Easy Setup], repeat step 6 until themessage indicating the setting completion isdisplayed.7 For [Admin Setup], press the untilthe top screen appears.For [Easy Setup], press the tocomplete the setup.Memo If you want to cancel the setup of [Easy Setup], press<RESET/LOG OUT> key.Other Menus1 Press the <SETTING> key to open theequipment setting menu.2 Press the to select the setup menu onwhich you want to change a setting andthen press .3 Change the setting and then press .4 Press the until the top screen appears.OKOKOKOKOK
