Using Drivers and Software- 42 -Using ICA DriverThe ICA driver is not compatible with theWindows OS.The ICA driver supports the Mac OS X 10.6/10.7.Start to readNote Some examples of image capture are used in the followingprocedure. The steps and menus may differ depending onthe application you use.1 Press the <Scan> key on the controlpanel.2 Place your document with text face upinthe ADF or face down on the documentglass.3 Press the to select [Remote PC] andthen press .4 Start image capture on your computer.5 Select the machine from the list at theleft to the image capture screen.6 Click the <Scan>.Scanning will start.7 From the [Image Capture], select[Close Image Capture].Change settingsYou can adjust the document scan by changingthe current driver settings.The following explains each item to set.Display the detailed informationYou can adjust the document scanning in details.1 Follow steps 1 to 5 of "Start to read"section.2 Click on [Display the detailedinformation].3 Change the settings as required.4 Click [Scan] to scan the document.Using ActKey SoftwareUsing the ActKey, you can start a scan job inspecified settings with a click a button.Memo ActKey does not support Mac OS X. When ActKey is installed, Network Configuration is alsoinstalled simultaneously. For Network Configuration, referto "Using Network Configuration" P. 43.Reference For details on how to start a scan job, refer to the User'sManual Advanced.Installing the Software1 Insert the "Software DVD-ROM" into yourcomputer.A window opens.2 Select [ActKey] from [Software].3 Install the software as instructed.4 Click [Finish].Starting the Software1 Click [Start] to select [All Programs] >[Okidata] > [ActKey] > [ActKey].Starting ActKey when Scanning to aLocal PCYou can set ActKey to start when you select[Local PC] on the machine.1 Click [Start] to select [Control Panel].2 Enter [View scanners and cameras] in[Search Control Panel].3 Click the [View scanners and cameras]under [Devices and Printers].4 Select [MB4x1/ES41x1/MPS42x] andclick [Properties].If the [User Account Control] dialog boxappears, click [Yes].5 Click the [Events] tab.6 Select an event for [Select an event].7 Select the [Start this program] checkbox and then select [ActKey].8 Repeat steps 6 and 7 so that [ActKey] isset to all events.OK
