Panasonic AG-DTL1 Operating Instructions Manual

Also see for AG-DTL1: Operating instructions

Contents

102Error messagesWhen a problem has occurred in the unit, one of the following messages appears on the counter display. If theerror is not released even after taking the suggested remedial action, set the POWER switch to OFF, disconnectthe power cord, and consult your dealer.Error No. Description of problem Remedial actionWait with the power on untilthe error message is cleared.Turn the power off and backon again.Deterioration of the cassettetape may be to blame.Turn the power off and backon again, and replace thecassette tape.— d —Condensation has formed.The only function button which can be operated is the EJECT button.The loading operation is not performed when a cassette tape hasbeen inserted.The cylinder rotates when a cassette tape has not been inserted.E — 2This appears when the cassette tape has not been inserted correctlyor it has not been ejected 2 to 5 seconds or so after the EJECT buttonhas been pressed.The power is automatically turned off.E — 3This appears when the loading or unloading operation is notcompleted even after 2 to 5 seconds or so have elapsed.The power is automatically turned off.E — 4This appears when the rotational speed of the cylinder motor isabnormally low.The power is automatically turned off.E — 5This appears when an abnormal torque applied to the reel motor, etc.has been detected.The power is automatically turned off.E — 6 This appears when the tape transport becomes unstable.The power is automatically turned off.Turn the power off and backon again.E — 7This appears when a problem occurs in the solenoid controlling thereel base.The power is automatically turned off.Dirty heads or deterioration ofthe cassette tape may be toblame.Clean the heads or replace thecassette tape.=(flashes)“=” flashes when the proper video level could not be achieved afterREC REVIEW.