31Useful functions5 Upon completion of the settings, set thePROGRAM switch to the OFF position.The setting menu screen is cleared from the TVmonitor, and the normal mode is restored.6 Press the TIMER MODE button on the front paneland set it to the internal timer recording mode (the“INT” lamp lights on the display tube).When the free-set timer is executed, “¢” willappear on the right of the free-set timer number.O If the cassette tape has not been inserted or itsaccidental erasure prevention tab has beenbroken out, the buzzer will sound, and the INTlamp will flash.The buzzer will sound and the INT lamp willflash also when the date/time or the programtimer has not been set.O To release the internal timer recording mode,press the TIMER MODE button to turn off theINT lamp on the display tube.Free-set timerRecording is initiated for the programmed durationon the date which has been set.If the time zone programmed using the free-set timeroverlaps the time zone programmed using the weeklytimer, the free-set timer takes precedence.<2 12 16 5∫ ; 343434H HINT42•56 3 “INT” lamp[FREE SET TIMER] P9MONTH DAY SET1) ¢¢ – ¢¢ ¢¢¢¢¢2) ¢¢ – ¢¢ ¢¢¢¢¢3) ¢¢ – ¢¢ ¢¢¢¢¢4) ¢¢ – ¢¢ ¢¢¢¢¢5) ¢¢ – ¢¢ ¢¢¢¢¢6) ¢¢ – ¢¢ ¢¢¢¢¢7) ¢¢ – ¢¢ ¢¢¢¢¢8) ¢¢ – ¢¢ ¢¢¢¢¢9) ¢¢ – ¢¢ ¢¢¢¢¢10) ¢¢ – ¢¢ ¢¢¢¢¢11) ¢¢ – ¢¢ ¢¢¢¢¢12) ¢¢ – ¢¢ ¢¢¢¢¢1 Finish setting the weekly timer and daily timer.2 Set the PROGRAM switch to the MENU position.The setting menu screen now appears on the TVmonitor.3 Press the PAGE (+) or PAGE (–) button to displaythe P9 FREE SET TIMER screen.The flashing items are ones that can be set.MONTHSet the month (1-12, ¢¢) of the date concerned in thiscolumn.Set “¢¢” if the month is not going to be registered.“¢¢-¢¢-¢¢¢¢¢” appears for MONTH, DAY and SET.DAYSet the day (1-31) of the date concerned in this column.SETSelect the program which was set for the weekly timer.SUN–SAT, P_OFF (POWER OFF mode throughout the day)Twelve days’ worth of dates can be set for the free-set timer.[FREE SET TIMER] P9MONTH DAY SET1) ¢ 5 – 3 SUN1) ¢ 5 – 4 SUN1) ¢ 5 – 5 SUN4) ¢¢ – ¢¢ ¢¢¢¢¢5) ¢¢ – ¢¢ ¢¢¢¢¢6) ¢¢ – ¢¢ ¢¢¢¢¢7) ¢¢ – ¢¢ ¢¢¢¢¢8) ¢¢ – ¢¢ ¢¢¢¢¢9) ¢¢ – ¢¢ ¢¢¢¢¢10) ¢¢ – ¢¢ ¢¢¢¢¢11) ¢¢ – ¢¢ ¢¢¢¢¢12) ¢¢ – ¢¢ ¢¢¢¢¢4 Take the following steps to set the timer recordingmode.O Use the (4), (3), (2) and (1) SHIFT buttonsto move the flashing part to the item whosesetting is to be changed.O Press the (+) and (–) SET buttons, and changethe setting.
