Panasonic AG-DTL1 Operating Instructions Manual

Also see for AG-DTL1: Operating instructions

Contents

58[STX] POF [ETX] [STX] POF [ETX] Sets the POWER switch to OFF.[STX] PON [ETX] [STX] PON [ETX] Sets the POWER switch to ON.RS-232CO Power control commandsData transmitted by PC Data returned from unit in response Description of commandO Search control commandsData transmitted by PC Data returned from unit in response Description of command[STX] SCP:data [ETX] [STX] SCP [ETX] Performs counter value search and performs playback.[STX] SCS:data [ETX] [STX] SCS [ETX] Performs counter value search and establishes the STILLmode.[STX] SAS:data [ETX] [STX] SAS [ETX] Performs alarm number search and establishes the STILLmode.[STX] SPT:data [ETX] [STX] SPT [ETX] Performs playback as far as the designated position (sameas the OPT command).[STX] STS:data [ETX] [STX] STS [ETX] Performs a date and time search and establishes the STILLmode.O Timer control commandsData transmitted by PC Data returned from unit in response Description of command[STX] TAT:data [ETX] [STX] TAT [ETX]Sets the time to be set when signals have been input fromthe component connected to TIME ADJ IN on the rear panelterminal section.[STX] TCS:data [ETX] [STX] TCS [ETX] Sets the current date.[STX] TTS:data [ETX] [STX] TTS [ETX] Sets the current time.O Video control commandsData transmitted by PC Data returned from unit in response Description of command[STX] VMD:m [ETX] [STX] VMD [ETX] Sets the color of the video output signals.[STX] VNR:m [ETX] [STX] VNR [ETX] Sets the video signals to be output to the monitor screen atall times except when the unit is in the recording mode.[STX] VVC [ETX] [STX] VVC [ETX] Detects whether video signals are input.