Panasonic AG-DTL1 Operating Instructions Manual

Also see for AG-DTL1: Operating instructions

Contents

80RS-232C$ Time lapse control commandsThese commands are not acknowledged while a search control command is being processed.Data transmitted by PC Data returned from unit in response Description of command[STX] LRB:m [ETX]Parameterm = F: Buzzer OFF0: 5 minutes1: 10 minutes2: 20 minutes3: 30 minutes[STX] LRB [ETX] Sets the buzzer to sound a warning in the event that theunit has been kept in the stop mode for the time designatedby the parameter.[STX] LRI:m [ETX]Parameterm = A: Alarm signal input isacknowledged.F: Alarm signal input isignored.[STX] LRI [ETX] Sets whether alarm recording or sensor recording is to beperformed if an alarm signal has been input while repeatrecording is underway or while the tape is being rewound.[STX] LRM:m [ETX]Parameterm = E: External timer recordingI: Internal timer recordingN: Regular recording[STX] LRM [ETX] Sets the timer recording mode.[STX] LRR:m [ETX]Parameterm = N: REC REVIEW is performedautomatically.F: REC REVIEW OFF[STX] LRR [ETX] Sets REC REVIEW.This function plays back the recording after recording for aspecific time to detect whether the proper video level isbeing maintained during recording.[STX] LSQ:m:t [ETX]Parameterm = 0—F: Camera No.1—16t = A: Auto sequence modeM: Manual sequence mode[STX] LSQ [ETX] Selects the camera number and sequence mode.[STX] LST:data1:data2 [ETX]Parameterdata1 = ndmmtt (start date/time)data2 = ndmmtt (end date/time)n = 1: 1st week2: 2nd week3: 3rd week4: 4th weekL: Last weekd = 0: Sunday1: Monday2: Tuesday3: Wendnesday4: Thursday5: Friday6: Saturdaymm = 01—12: Monthtt = 01—22: Hours[STX] LST [ETX] Sets the start date/time and end date/time settings fordaylight saving time.