Panasonic AG-DTL1 Operating Instructions Manual

Also see for AG-DTL1: Operating instructions

Contents

66RS-232C$ Display control commandsData transmitted by PC Data returned from unit in response Description of command[STX] DFC:m [ETX]Parameterm = C: (COUNT) counter displayI: (TIME) clock displayM: (CAMERA) camera numberdisplayP: (PASS) pass display[STX] DFC [ETX] Sets the display mode of the display tube.This command is not acknowledged while a search controlcommand is being processed.[STX] DBB [ETX] [STX] DBB [ETX] Sets black as the color of the characters displayed on themonitor screen.This command is not acknowledged while a search controlcommand is being processed.[STX] DBW [ETX] [STX] DBW [ETX] Sets white as the color of the characters displayed on themonitor screen.This command is not acknowledged while a search controlcommand is being processed.[STX] DDS:d:t:m:r [ETX]Parameterd = N or F (date)t = N or F (time)m = N or F (recording time mode)r = N or F (REC/ALARM)N: ON (displayed)F: OFF (not displayed)[STX] DDS [ETX] Sets the display items on the monitor screen.This command is not acknowledged while a search controlcommand is being processed.[STX] DMS:d:m:n [ETX]Parameterd = T (fixed)m = M: AM/PM displayH: 24-hour displayn = 0—9: VTR ID No.This unit does not have afunction for displaying the VTRID No. so any number between0 and 9 may be sent.[STX] DMS [ETX] Sets the time display mode (12-hour or 24-hour system).This command is not acknowledged while a search controlcommand is being processed.[STX] DPP:mm [ETX]Parametermm = C: CenterLB: Bottom leftLT: Top leftRB: Bottom rightRT: Top right[STX] DPP [ETX] Sets the position where the characters are to be displayedon the monitor screen.This command is not acknowledged while a search controlcommand is being processed.