Panasonic AJ-D810A Operating Instructions Manual

Also see for AJ-D810A: Service manual

Contents

– 116 –MAIN Menu Screen 1 of 4 (SUB menus)HIGH SETTING screenThe high level gain settings are performed on this screen.|Note{DARK DTL and LEVEL DEPENDserve opposite purposes: LEVELDEPEND is automatically set to 0when DARK DTL is set to a valueother than 0 and, conversely, DARKDTL is automatically set to 0 whenLEVEL DEPEND is set to a valueother than 0.The underlining in the variable range column indicates the setting in the preset mode.USER menu: The USER menu appears when the MENU switch is set to SET.ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button areheld down together.¢| H I G H S E T T I N G {5M A S T E RM A S T E RG A I N ::::::::::1 8 d BH . D T LH . D T LD T LL E V E LL E V E L. D T LD T LL E V E LVC O R I N G 1 0F R E Q 0 31 01 0D A R K 0 0D E P E N D . 0 8G A MM A 0 ..4B L A C K S T R E T C H O F FT A B L E AM A T R I X»»»ItemMASTER GAINH.DTL LEVELV.DTL LEVELDTL CORINGH.DTL FREQ.DARK DTLLEVEL DEPEND.MASTERGAMMABLACKSTRETCHMATRIX TABLEVariablerangep3 dB...18 dB...30 dB0...10...310...10...310...10...151...3...50...50...8...150.35...0.45...0.75ONOFFABOFFRemarksThis sets the gain to p3, 0, 3, 6, 9, 12,15, 18, 21, 24 or 30 dB.This sets the H.DTL (detail) level.This sets the V.DTL (detail) level.This sets the DTL coring.This selects the H.DTL frequency.1: 2.5 MHz 4: 4 MHz2: 3 MHz 5: 4.5 MHz3: 3.5 MHzThis sets the dark detail.This boosts the detail of the blackareas.This sets LEVEL DEPEND.This eliminates the detail only in thedark areas when the Y detail isboosted. The higher the numberselected, the wider the range acrosswhich the detail is eliminated.This sets the master gamma in0.01 increments.This selects ON or OFF for the modein which low-illumination blackouts arecompensated for.This selects the color compensationmatrix table.VFdisplayENGENGENGENGENGENGENGENGENGENG» indicates an ON/OFF setting.