– 58 –Status Displays Inside the Viewfinder Screen1 Extender displayThis is displayed when the lens extender is being used.2 Shutter speed/mode displayThis displays the shutter speed or shutter mode setting.OFF (OFF is not displayed.):The shutter is not used.1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000:Shutter speeds (seconds) during standard mode.1/60.3–1/250 (SYNCHRO SCAN):Synchro scan mode is selected.SUPER V: High vertical resolution mode is selected.3 Remaining tape length displayThis indicates the remaining tape length (minutes) for the VTR during recording.Remaining tape length displayDisplay Remaining tapelengthF–6060–5555–5050–4545–4040–3535–3030–2525–2020–1515–1010–55–0Full to 60 minutes60 to 55 minutes55 to 50 minutes50 to 45 minutes45 to 40 minutes40 to 35 minutes35 to 30 minutes30 to 25 minutes25 to 20 minutes20 to 15 minutes15 to 10 minutes10 to 5 minutes5 to 0 minutes The “5–0” display flashes when there isless than 2 minutes of tape remaining.4 Remaining battery level displayWhen an Anton Bauer Digital Magnum Series battery is used to supply power to the unit, theremaining battery level is displayed numerically (%).|Note{When a Digital Magnum series battery made by Anton Bauer is used to supply externalpower to the unit near the battery end, the remaining battery level display will show theexternal voltage, and the unit will be operated by the external power supply.5 Filter displayThis displays the type of filter selected.6 White balance memory displayThis displays the selected white balance automatic adjustment memory.A: The WHITE BAL switch is set to A.B: The WHITE BAL switch is set to B.P: The WHITE BAL switch is set to PRST.7 Gain value displayThis displays the image amplifier gain setting (dB) set by the GAIN switch.
