– 66 –Adjusting the Time and DateAdjustment and setup using the setting menu1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UPbutton are held down together.2 Press the PAGE button to display the MAIN menu screen 3 of 4.3 Press the SHIFT/ITEM button to move the cursor to the “TIME/DATE” position.4 Press the UP or DOWN button to open the TIME/DATE page.5 Press the SHIFT/ITEM button to select the item to be changed.6 Press the UP (or DOWN) button to change the setting value.The number is incremented by o1 each time the UP button is pressed and decremented byp1 each time the DOWN button is pressed.7 When the settings have been completed, press the SHIFT/ITEM button to select TIME/DATESET and then press the UP (or DOWN) button. The time starts from when the button ispressed.8 When menu operations have been completed, set the MENU SET/OFF switch to OFF.The setting menu disappears from the viewfinder screen and the displays indicating the unit’scurrent status appear at the top and bottom of the viewfinder screen.|Note{The seconds cannot be set and always start from 0 seconds.T I M E / D A T EY E A R :::::9 9MO N T H 0 1D A Y 0 1H O U R 0 0M I N U T E 0 0T I M E / D A T E» S E T{¢|T I M E / D A T EY E A R :::::9 9MO N T H 0 1D A Y 0 1H O U R 0 0M I N U T E 0 0T I M E / D A T E» S E T{|¢T I M E / D A T E» S E T
